What are the advantages of using a variable speed reducer on a dual station winder?
Variable frequency motors can work for a long time under severely higher or lower power frequency conditions without damage, and the cooling system and speed of ordinary motors are closely related. The speed of the motor is fast, and the cooling system works well. Slow, the cooling effect will be greatly reduced, and the frequency conversion motor does not have this problem.
The reducer saves space, is reliable and durable, has a high overload capacity, and the power can reach more than 95KW; low energy consumption, superior performance, and the efficiency of the reducer is as high as 95% or more; small vibration, low noise, high energy saving, high-quality section steel materials, steel The surface of the gear is highly heat-treated; the precision machining ensures the positioning accuracy of the double-disc winder, all of which constitute the gear reduction motor of the gear transmission assembly; the maintenance is convenient, the cost is low, and the technology is mature.
The reducer adopting the integrated motor and reducer can reduce the installation space, improve efficiency and save design workload.
The winding and binding line has high efficiency, safe and convenient operation, and can be fully automated when connected to your production line.
It can play an important role in the production and packaging of your products.
Can long-term, a lot of saving packaging and labor on the economic expenditure, and packaging neat and beautiful.
How to repair the equipment of packaging line
Today, with the rapid development of society, the automatic packaging assembly line equipment has brought us huge economic benefits, but with the long-term use of the equipment, it will inevitably bring certain wear and tear. How to repair the packaging assembly line equipment is as follows:
According to the commonly used repair technology in the maintenance work of the automatic packaging assembly line, it can be roughly divided into mechanical repair method, welding repair method, electroplating repair method, spraying repair method and bonding repair method according to the adopted technology. The following factors should be taken into consideration in the specific selection
1. If the repaired parts are to be preheated or the temperature is high during the repair process, the parts will be annealed, the quenched structure will be damaged, and the thermal deformation will increase. Therefore, after the repair, the parts with requirements for accuracy shall be processed, shaped, heat treated, etc., so the deformation shall be considered during the repair.
2. The strength of the repaired parts is different from that of the repaired layer in general conditions. Therefore, the strength of the repaired layer, the bonding strength between the repaired layer and the parts, and the strength change after the repair of the parts are important indicators of the repair quality.
3. The adaptability of repair process to parts’ materials. In the existing repair process, some materials are suitable for repair, some are destructive to parts, and various processes have great limitations on the adaptability of materials, so it is necessary to select the right materials.
4. The repair degree that can be achieved by various repair processes should be selected according to the wear degree of parts, and the thickness of repair layer that can be achieved by different processes is different.
5. Impact of repair process on physical properties of parts, such as hardness, processability, wear resistance and compactness. High hardness, difficult to process; low hardness, fast wear; uneven hardness, the processing surface is not smooth. The wear resistance of the friction surface is not only related to the surface hardness, but also to the metallographic structure, the bonding condition and the ability of the surface to absorb lubricating oil. For parts that may leak liquid or gas after repair, the compactness of repair is required, and sand holes, air holes, cracks, etc. shall not be produced. Therefore, the physical properties of repair layer must be considered when selecting repair process.
6. The influence of different parts structure on process selection is huge. When repairing threaded holes and repairing holes with inlay method, the thickness of repair layer is tweezers and the metal of parts is covered by submerged arc welding, bonded and mended with iron plating, manual arc stack bait, vibration electric fox welding, brazed and spray chromium plating.
7. The most important thing we care about when we do any process is the economy of repair. According to the comprehensive analysis of repair cost, repair cycle, service cycle after repair, service performance and other aspects of different repair methods, we should repair the parts and compare them with the replacement parts to make them economical and reasonable.
There are many kinds of repair methods for parts of automatic packaging assembly line equipment. Each repair method has its own advantages and limitations. The above factors are reasonable, but some are contradictory. It is necessary to make a comprehensive analysis and comparison from three aspects of economy, quantity and time in combination with the actual conditions of the unit, and strive to make the process reasonable, economical and feasible in production when selecting the process. So that the repair layer and the matrix are firmly combined, so that the repair process has the least adverse effect on the matrix metal, so that the repaired parts can obtain excellent performance, and finally the repair work can obtain good economic benefits.
Pipe automatic wrapping line through different materials, packaging layer can eliminate most of the air, dust and moisture. By selecting suitable packaging materials, the packaging can reduce corrosion, water stains, dust and rust. It protects the coil surface during storage and transportation
Development and application of automatic packaging line
With the rapid increase of economic and social development demand, in order to solve the problem of recruitment difficulties and reduce the cost of workers, automatic packaging line is introduced by many industries producing products. Automatic packaging line is widely used in pipe, metal, food, beverage, rubber products and other industries. Its automation is becoming more and more intelligent, convenient and other performance to the industry development with considerable benefits welcomed by some industries.
With the continuous development of automation technology, the rapid development of economy, the continuous progress of society, the gradual improvement of material living standards, the emergence of many new automatic packaging lines, the emergence of various kinds of goods packaging industry one after another, which may be a very good phenomenon of automation development, but in today’s society, there will be various problems for enterprises, such as It is really difficult for manufacturers to choose the packaging line with multiple types and different functions.
The new technology has been improving, the packaging line is more and more automatic, the food enterprises use the automatic packaging line to complete the packaging products, not only to improve the production efficiency, but also to make the requirements of food safety guards more in line with the national regulations, so that the production efficiency of the food industry has improved the quality. In recent years, the application scope of automatic assembly line has expanded from food industry to beverage, tire, metal, steel, plate, pipe and many other industries. With the development of automation technology, the application scope of automatic packaging line will continue to expand, bringing better benefits to the production industry
Fhope design and production of automatic aluminum profile packaging line, aluminum winding packaging line, industrial aluminum packaging line is specially designed for aluminum, steel, copper, plastic pipe and other packaging. The equipment is deeply satisfied by the market and customers. The equipment is efficient and energy-saving, saves manpower and material resources, and can create high efficiency.
We provide many kinds of packing line for aluminum packaging machine, such as aluminum banding machine, wood feeder, three side covering machine, etc. We can make semi-automatic or fully automatic packaging line for you.
Can be applied to: aluminum profile packaging, industrial aluminum packaging, aluminum tube packaging, aluminum bundle aluminum bar packaging and so on.
How to deal with the water in the aluminum packaging
For the aluminum plate with high surface requirements, if the packaging water is not treated, it will lead to surface oxidation and white spots, which seriously affects the surface quality of the aluminum plate. Therefore, if the packaging water is not treated, it must be treated in time. Next, Foshan aluminum plate wholesale will introduce the treatment method of water inflow in aluminum plate packaging.
First of all, open the aluminum plate packaging, wipe the water with a clean cloth, if it is the aluminum plate with high surface requirements, pay attention to the oil stain during the wiping process.
Secondly, ventilate and dry the water to ensure that there is no water stain on the surface of the aluminum plate.
Later, when packaging, paper is separated between the aluminum plate surface and the plate surface, and the aluminum plate surface which is not completely dried is adsorbed by the water absorption capacity of the paper.
For aluminum plate, moisture-proof is an important aspect of storage. Although the packaging of aluminum plate will be made of waterproof plastic cloth and moisture-proof agent inside, if there is rain during transportation, the water in the packaging needs to be treated as soon as possible.
FHOPE tire winding and packaging machine, also known as vertical ring winding and packaging machine, is applied to: tire, rubber hose, floor heating pipe, water supply pipe, cable, steel coil, steel strip and other ring products
FHOPE bearing winding packaging machine is able to cover all surfaces of packaging materials through good control of overlapping. Through different materials, the packaging layer can eliminate most of the air, dust and moisture. By selecting suitable packaging materials, the packaging can reduce corrosion, water stains, dust and rust. It protects the coil surface during storage and transportation.
Windding mechanical wire winding machine is a kind of equipment used for winding and packaging wire, such as wire, wire, cable, etc., to achieve good protection and decoration effect; it has the advantages of fast packaging speed, wide packaging range, simple operation